Αναζήτηση προϊόντος
About VIPER
Viper, in all versions, is a cheap and a user friendly electronic weighing system which allows to display the immediate weight transported.
Viper I allows the load ckeck by measuring the cylinder lifting pressure of the rear tipper.The system precision is guaranteed exclusively with a constant barycentre of the load.
Viper II has been studied for all the operators that often work abroad providing the immediate weight on each axle.
Viper III provides the immediate weight reading of the rear tipper.It provides with high precision the total weight of the vehicle or the net value of the load.The system is installed completely on the trailer which can then have any tractor hitched to it.The reaching of the preset maximum load transmits a signal to the operator via an external acoustic alarm.
Advatages
- Reliable
- Excellent value for money
- User friendly
- Semitrailer or truck on board weighing
- Small dimensions
- Overload alarms
- Reusable system
| Technical Data |
VIPER I (rear tipper load ckecking) |
| Display | 12,5 mm red LED display |
| Screen | Gross or net weight on the axles and suspension pressure |
| Keypad | 4 key membrane keypad |
| Power supply |
12-32 Vdc |
| Protection level | IP 54 |
| Dimesions | 100 x 100 x 42 mm in black anodised aluminium enclosure |
| Connection | 3 meter long - 3 wire power supply and output relay contact cable. Ring-nut intakes intended for 8/6 hose |
| Optional | Acoustic alarm, IP55 Protective box |
| Technical Data |
VIPER II (axle load weighing) |
| Display | 12,5 mm red LED display |
| Screen | Gross or net weight on the axles and suspension pressure |
| Keypad | 4 key membrane keypad |
| Power supply |
12-32 Vdc |
| Protection level | IP 54 |
| Dimesions | 100 x 100 x 42 mm in black anodised aluminium enclosure |
| Connection | 3 meter long - 3 wire power supply and output relay contact cable. Ring-nut intakes intended for 8/6 hose |
| Optional | Acoustic alarm, IP55 Protective box |
| Technical Data |
VIPER III (rear tipper weighing) |
| Display | 12,5 mm red LED display |
| Screen | Gross or net weight on the axles and suspension pressure |
| Keypad | 4 key membrane keypad |
| Power supply |
12-32 Vdc |
| Protection level | IP 54 |
| Dimesions | 100 x 100 x 42 mm in black anodised aluminium enclosure |
| Connection | 3 meter long - 3 wire power supply and output relay contact cable. Ring-nut intakes intended for 8/6 hose |
| Optional | Acoustic alarm, IP55 Protective box |
Photographs
